Blower motor resistor for CITROЁN C4 II Grand Picasso 2.0 BlueHDi 150 (110 kW / 150 hp) AHR (DW10FD), AHX (DW10FD) 06/2013 - 2024. Blower motor resistor for CITROЁN C4 II Grand Picasso 1.2 THP 130 (96 kW / 130 hp) HNY (EB2DTS) 04/2014 - 2024. Heater resistor for CITROЁN C4 II Grand Picasso 1.6 THP 155 (115 kW / 156 hp) 5FV (EP6CDT) 09/2013 493 Answers. SOURCE: citroen rear window heater problem. i would check all the fuses first. then make sure the connections are tight and free from corrosion where the wire plugs into the back windo heater. Posted on Jul 15, 2012. Carefully remove the old fuse from the housing and insert the new fuse in its place. Check the performance of the cigarette lighter or the required equipment. All fuses, fuse links, relay, and circuit breakers protect your vehicle’s electrical system from overloading with diagrams, layouts and assignment. Took that thing off (fairly easily), it was one wire on that plastic connector that goes into base, unit, that has all bulbs in it. Looked like it was melt a bit. Use some very small screwdriver and tried to clean that plastic. Then, used some WD40 (as I didnt have contact cleaner), leaved it for 15 min, then, connected all again. It does not store any personal data. Citroen C4 2010-2017 Heater Matrix| Genuine Citroen parts cheaper than main dealerships | Shipped straight to your door. | Citroen C4 2010-2017 Heater Matrix 9821299980. Here you will find fuse box diagrams of Citroen C4 Picasso II 2013, 2014, 2015, 2016, 2017 and 2018, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout). See other Citroën C4: Citroën C4 (2004-2010)…>> Citroën C4 (2011-2017)…>> Citroën C4 Aircross (2012-2017)…>> Citroen paint codes - Location. As with most car manufacturers Citroen paint codes can be found in several locations. The most reliable place is inside the drivers side door shut on a white and silver sticker (see image). On some models it will be in by the hinges of the door (where the door hangs) as in the below image. Before the starter can be removed from the car there's another couple of tasks: 1/ Remove flexible exhaust section (bend that goes over chasssis) 2/ The starter motor has a little metal bracket fastened to it to support wiring tray. There's a 13mm spanner size (normal external hex head) bolt securing this to the starter. .

citroen c4 grand picasso relay location